高效液相色谱-串联质谱法结合多糖衍生物手性固定相拆分氰戊菊酯

建立了以多糖衍生物为手性固定相的高效液相色谱-串联质谱(HPLC-MS/MS)直接拆分氰戊菊酯对映体的方法。在反相液相色谱条件下,考察了手性固定相的种类、流动相组成、柱温、流速对氰戊菊酯4个立体异构体分离的影响。同时,利用热力学方法对氰戊菊酯的立体异构体与固定相之间的色谱保留和分离的热力学机理进行了探讨。结果表明:采用Lux Cellulose-3(纤维素-三(4-甲基苯甲酸酯))手性色谱柱,在以流动相为乙腈-水(5 mmol/L甲酸铵)=(55:45,V:V)流速0.4 mL/min,柱温30℃的条件下,可在14 mins内实现氰戊菊酯4个立体异构体的基线分离。拓展了HPLC-MS/MS在菊酯类手性农药对映体分离及检测上的应用。     

Modulation of the lifespan of C. elegans by the controlled release of nitric oxide

The frontier of nitric oxide biology has gradually shifted from mechanism elucidation to biomanipulation, e.g. cell-proliferation promotion, cell-apoptosis induction, and lifespan modulation. This warrants biocompatible nitric oxide (NO) donating materials, whose NO release is not only controlled by a bioorthogonal trigger, but also self-calibrated allowing real-time monitoring and hence an onset/offset of the NO release. Additionally, the dose of NO release should be facilely adjusted in a large dynamic range; flux and the dose are critical to the biological outcome of NO treatment. Via self-assembly of a PEGylated small-molecule NO donor, we developed novel NO-donating nanoparticles (PEG-NORM), which meet all the aforementioned criteria. We showcased that a low flux of NO induced cell proliferation, while a high flux induced cell oxidative stress and, ultimately, death. Notably, PEG-NORM was capable of efficiently modulating the lifespan of C. elegans. The average lifespan of C. elegans could be fine-tuned to be as short as 15.87 ± 0.29 days with a high dose of NO, or as long as 21.13 ± 0.41 days with a low dose of NO, compared to an average life-span of 18.87 ± 0.46 days. Thus, PEG-NORM has broad potential in cell manipulation and life-span modulation and could drive the advancement of NO biology and medicine.

Schematic illustration of modulating the longevity of the C. elegans by PEG-NORM nanoparticles.     

Synthesis and Characterization of ZSM-5/β Co-Crystalline Zeolite

ZSM-5/β co-crystalline zeolites with different content of ZSM-5 have been synthesized by adding different amount of ZSM-5 to the synthetic system of β zeolite with NaAlO2, silica sol as the source of aluminum and silica, respectively, and TEA as the template under controlled condition of the synthesis. The ZSM-5/β co-crystalline zeolite was studied by XRD, SEM, BET and NH3-TPD. The reaction activity of toluene alkylation was investigated with a mixture of toluene-methanol as the feedstock in a pulse micro-reactor over the ZSM-5/β co-crystalline zeolite. It is found that ZSM-5/β co-crystalline zeolite has two kinds of zeolite structure including ZSM-5 and β zeolite, not in the form of a physical mixture. The pore structure of ZSM-5/β co-crystalline zeolites is different from that for β zeolite, ZSM-5 and their physical mixture. In addition, the peaks of both high and low temperature desorption of ammonia over the ZSM-5/β co-crystalline zeolite shift 23 ℃ to lower temperatures and the acid amount of its strong acid is 3% more than the physical mixture. So the ZSM-5/β co-crystalline zeolite produces the highest content of xylene, which is 10.4% higher than the physical mixture. And the ZSM-5/β co-crystalline zeolite has better selectivity for toluene alkylation and weaker de-methylation than β zeolite, ZSM-5 and their physical mixture.     

Synthesis of dendritic polyamide with protected amino functional groups in the periphery

A homologous series of first-to third-generation dendritic polyamides 2a, 3, and 5 with tris(aminoethyl) amine (TREA) as the core and the protected amino functional groups at the periphery were synthesized via active ester route from “Schlüter” type dendron 1a. Their structures were characterized by ¹H-NMR and mass spectra. Based on the efficient synthesis of the first generation dendrimer 2a (yield 75%), the synthesis of second-generation dendrimer 3 was found to be more efficient via the convergent method (yield 69%), while the mixed strategy was applied efficiently for the synthesis of the higher generation dendrimer 5 (yield 37%). The overall yield for the third generation dendrimer 5 from Schlüter dendron is 12%. __________ Translated from Huaxue Tongbao (Chemistry), 2005, 68(12) (in Chinese)     

Conformational stabilities of 1,1-dicyclopropylethene determined from variable-temperature infrared spectra of xenon solutions and ab initio calculations

The infrared (3200-40 cm(-1)) spectra of gaseous and solid 1,1-dicyclopropylethene, (c-C3H5)2C=CH2, along with the Raman (3200-40 cm(-1)) spectra of liquid and solid phases, have been recorded. The major trans-gauche (C=C bond trans to one ring with the other ring rotated about 60 degrees from the C=C bond, trivial C(1) symmetry) and gauche-gauche (the two three-membered rings rotated oppositely about 60 degrees from the C=C bond, C2 symmetry) rotamers have been confidently identified in the fluid phases, but no definitive spectroscopic evidence was found for the gauche-gauche' form (the two three-membered rings rotated to the same side about 60 degrees from the C=C bond, Cs symmetry), which is calculated to be present in no more than 6% at ambient temperature. Variable-temperature (-55 to -100 degrees C) studies of the infrared spectra of the sample dissolved in liquid xenon have been carried out. Utilizing six different combinations of pairs of bands from the C1 and C2 conformers, the average enthalpy difference between these two has been determined to be 146 +/- 30 cm(-1) (1.75 +/- 0.36 kJ x mol(-1)), with the C1 form more stable. Given statistical weights of 2:1:1 respectively for the C1, C2, and Cs forms, it is estimated that there are 75 +/- 2% C(1) and 19 +/- 1% C2 conformers present at ambient temperature. By utilizing predicted frequencies, infrared intensities, Raman activities, and band envelopes from scaled MP2(full)/6-31G(d) ab initio calculations, a complete vibrational assignment is made for the C1 form and a number of fundamentals of the C2 conformer have been identified. The structural parameters, dipole moments, and conformational stabilities have been obtained from ab initio calculations at the level of Hartree-Fock (RHF), the perturbation method to second order with full electron correlation (MP2(full)), and hybrid density functional theory (DFT) by the B3LYP method with a variety of basis sets. The predicted conformational stabilities from the MP2 calculations with relatively large basis sets are consistent with the experimental results. Structural parameters are estimated from the MP2(full)/6-311+G(d,p) predictions which are compared to the previously reported electron diffraction parameters. These experimental and theoretical results are compared to the corresponding quantities of some similar molecules.     

类晶加合物(M=Co, Cu, Ni)的晶体结构及分子间相互作用的理论研究

合成了3种化合物 [2-ClPyH]2CoCl4(1), [2-ClPyH]2NiCl4(2)和[2-ClPyH]2CuCl4(3), 单晶X射线衍射法晶体结构测定结果表明, 这3种化合物是同形加合物, 在它们的结构中, [2-ClPyH]+离子呈平面状, 而[MCl4]2-离子为变形的四面体. 晶体结构分析发现晶体中存在N—H…Cl和C—H…Cl氢键, 以及Cl…Cl分子间相互作用和π-π堆积作用. 对自由状态下独立的配位离子进行的几何构型优化, 以及三维周期性条件下几何结构优化的量子化学计算结果表明, 标题化合物中具有方向性和选择性的氢键决定延伸性结构的方向, 而相对较弱的卤素…卤素作用在最终晶体结构的确定中扮演很重要的角色.     

Hydrothermal synthesis and intercalation behavior of a layered titanium phosphate Ti2(H2PO4)(HPO4)(PO4)2 · 0.5C6N2H16, with an extended γ-phase intercalated into organic amine

With a hydrothermal technique, a layered titanium phosphate with the formula Ti₂(H₂PO₄)(HPO₄)(PO₄)₂ · 0.5C₆N₂H₁₆ (denoted TP-J2) has been prepared by treating the Ti/H₃PO₄/H₂O/1-methylpiperazine system directly. The as-synthesized products were characterized by powder X-ray diffraction, CP-MAS solid-state ³¹P NMR spectroscopy, thermogravimetric and differential thermal analyses (TG-DTA). The structure was solved by single-crystal X-ray diffraction analysis and it presents an extended γ-phase intercalated with organic amine. Crystal data: triclinic, , a = 8.106 (2) Å, b = 8.197 (2) Å, c = 11.658 (2) Å.  = 78.32 (3)°, β = 80.85 (3)°, γ = 77.90 (3)°, Z = 2. Additionally, the intercalation behavior of TP-J2 with n-alkyl monoamine (n = 2, 3, 4, 6, 8, 10 and 12) was investigated. Owing to the strong brønsted base, N,N′-dimethylpiperazine, resides in the interlayer, it presented unusual features of TP-J2 in contrast with that of γ-Tip.     

Ring-closing metathesis of olefinic peptides: design, synthesis, and structural characterization of macrocyclic helical peptides

Heptapeptides containing residues with terminal olefin-derivatized side chains (3 and 4) have been treated with ruthenium alkylidene 1 and undergone facile ring-closing olefin metathesis (RCM) to give 21- and 23-membered macrocyclic peptides (5 and 6). The primary structures of peptides 3 and 4 were based upon a previously studied heptapeptide (2), which was shown to adopt a predominantly 3(10)-helical conformation in CDCl(3) solution and an alpha-helical conformation in the solid state. Circular dichroism, IR, and solution-phase (1)H NMR studies strongly suggested that acyclic precursors 3 and 4 and the fully saturated macrocyclic products 7 and 8 also adopted helical conformations in apolar organic solvents. Single-crystal X-ray diffraction of cyclic peptide 8 showed it to exist as a right-handed 3(10)-helix up to the fifth residue. Solution-phase NMR structures of both acyclic peptide 4 and cyclic peptide 8 in CD(2)Cl(2) indicated that the acyclic diene assumes a loosely 3(10)-helical conformation, which is considerably rigidified upon macrocyclization. The relative ease of introducing carbon-carbon bonds into peptide secondary structures by RCM and the predicted metabolic stability of these bonds renders olefin metathesis an exceptional methodology for the synthesis of rigidified peptide architectures.     

Intramolecular Mannich reaction in the asymmetric synthesis of polysubstituted piperidines: concise synthesis of the dendrobate alkaloid (+)-241D and its C-4 epimer

[reaction: see text] The intramolecular Mannich reaction of delta-amino beta-keto esters with aldehydes and ketones is a new methodology for the synthesis of polysubstituted piperidines and is illustrated by the concise asymmetric synthesis of the dendrobate alkaloid (+)-241D and its C-4 epimer.     

An alternative multipolar expansion for intermolecular potential functions

We have derived a new multipolar expansion for intermolecular potential-energy functions with applications in molecular physics, theoretical chemistry, and mathematical physics. The new formulation employs a separation of radial and angular terms with a simple index structure that leads to computational efficiency and ease of physical interpretation. For the case of the Coulomb interaction, we compare the present formulation with two conventional multipole expansions: the Cartesian tensor and the irreducible spherical tensor expansions. The new formalism leads to efficient numerical algorithms that are useful for general applications beyond intermolecular potentials. In addition to the electrostatic Coulomb interaction, we illustrate the formalism with applications to special function theory and a bipolar expansion involved in potential theory.